Euro-Bearings Ltd Online Catalogue

Product Sections

Main Pages

Home

Best Sellers

786014

£19.62

128x30 (holes 110mm) M10 thread. Part number 786014 Max continuous compression 1600N

find out more

MM30x15

£3.58

Male Male 30mm diameter, 15mm long bobbin mount with M8 thread. Max compression load 420N
find out more

FF30x30

£4.76

Female Female 30mm diameter, 30mm long bobbin mount with M8 thread. Max compression load 420N
find out more

MW60x60

£9.51

Male Male waisted 60mm diameter, 60mm long bobbin mount with M10 thread. Max compression load 1620N
find out more

MM50x30

£5.45

Male Male 50mm diameter, 30mm long bobbin mount with M10 thread. Max compression load 1170N
find out more

MM50x45

£6.29

Male Male 50mm diameter, 45mm long bobbin mount with M10 thread. Max compression load 1170N
find out more

Male/Male Bobbins

Anti-vibration mounts with male threads both sides. Buffers/Bobbins are one of the most popular means of dampening vibration. They can be subjected to both shearing and compressive loads. This range can be used successfully on a wide range of machines.

Male/Female Bobbins

Anti-vibration mounts with male thread one side & female thread the other. Buffers/Bobbins are one of the most popular means of dampening vibration. They can be subjected to both shearing and compressive loads. This range can be used successfully on a wide range of machines.

Female/Female Bobbins

Anti-vibration mounts with female threads both sides. Buffers/Bobbins are one of the most popular means of dampening vibration. They can be subjected to both shearing and compressive loads. This range can be used successfully on a wide range of machines.

Male/Male Waisted Bobbins

Anti-vibration mounts with male threads both sides. The body is waisted or 'hour glass' shaped. The effect of 'waisting' these male/male buffers gives it more durability even at peak dynamic loads. Since the very dangerous peak stresses can be avoided at the edges of the bonded surfaces, these buffers are less affected by tensile stress than the standard cylindrical ones.

Male Bumper

Anti-vibration mounts with male thread one side. Bump stops are used to limit the effect of impact and as shock aborbers. They can also be used as fenders.

Female Bumper

Anti-vibration mounts with female thread one side. Bump stops are used to limit the effect of impact and as shock aborbers. They can also be used as fenders.

Male Conical Bumper

Parabolic / conical anti-vibration mounts with male thread one side. Bump stops are used to limit the effect of impact and as shock aborbers. They can also be used as fenders.

Machine Mounts

Machine mountings are used to mount machines in a manner that does not allow excessive
horizontal floating. That is, the horizontal stiffness is much greater in all directions than the vertical stiffness.
The fact that they bolt down means that these mounts are far superior than the use of mere rubber coated feet when mounting a machine

Cone Mounts

An ideal anti-vibration mounting for motors, engines, compressors etc. Cone mounts consist of inner and outer metal cones. The outer cone has an oval or rectangular flange for mounting purposes. Top and bottom stop plates are fitted in order to limit deformation under compression and tension. These cone mounts are designed so that the springing is SOFT AXIALLY and VERY STIFF RADIALLY

Bushes

Rubber metal anti-vibration bushes. Other bushes are available to order. Please enquire.

Best Sellers

Why not browse our best sellers for ideas?

New Products

See our latest products here...